Low power factor reduces an electrical system’s distribution capacity by increasing current flow. Therefore, having a low power factor is inefficient and expensive. But what is power factor and what ...

Ideally, the power factor should be 1; then the load appears as a resistor to the AC source. However, in the real world, electrical loads not only cause distortions in AC current waveforms, but also ...

When it comes to the most typical cause of poor power factor in a facility, motor inductance is a likely culprit. The problem worsens when motors are not loaded to their full capacity. Harmonic ...

Power factor (pf) is the ratio between real power (P) flowing to the load, and the apparent power (S) in the circuit: pf = P/S. It is a sinusoidal waveform and therefore expressed as a dimensionless ...

Power factor correction uses parallel connected capacitors to oppose the effects of inductive elements and reduce the phase shift between the voltage and current. Power factor correction is a ...

Standby power refers to the electric power consumed by electronic appliances while they are switched off or in a standby mode – but still connected and still drawing power. Fundamentally, standby ...

Most discussions on manufacturing energy efficiency focus on identifying easy-to-find-and-fix energy wasters such as compressed air leaks, inefficient lighting, equipment that is always left on when ...

The power factor measurement has long been accepted as an invaluable tool for identifying insulation defects, such as ageing, deterioration, moisture ingress and localized failures, involving the ...